Quiz - Stress Analysis
Quiz Summary
0 of 7 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 7 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 7
1. Question
Which of the following area is mechanics not applied?
CorrectIncorrect -
Question 2 of 7
2. Question
In the simulation of the bike crank, what steps does an engineer need to do to build up the model? (Select all applicable)
CorrectIncorrect -
Question 3 of 7
3. Question
Which of the following simulations can be done as a rigid-body analysis?
CorrectIncorrect -
Question 4 of 7
4. Question
What would an engineer do when converting the helicopter pitch arm to a numerical model and conducting the simulation? (Select all applicable)
CorrectIncorrect -
Question 5 of 7
5. Question
Select the correct statement/s about the helicopter pitch arm simulation
CorrectIncorrect -
Question 6 of 7
6. Question
In the helicopter pitch arm simulation, why doesn't an engineer model the whole rotor? (Select all applicable)
CorrectIncorrect -
Question 7 of 7
7. Question
Which of the following statements about rigid body analysis is/are true? (Select all applicable)
CorrectIncorrect