Download the zip file and extract the contents. Go through the Instructions file. Follow along with the provided steps and solve the model. You can start the quiz after you have obtained a solution.
For performing the simulation, you can use the latest release of the academic, commercial or free student version of Ansys Mechanical. Download Ansys Student for free here.
0 of 10 Questions completed
Questions:
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
For this water tank Response Spectrum analysis, if change the Acceleration Spectrum input from X direction to Z direction, without rerun the analysis, what do you expect about the deformation results? Choose the best option. Choose the best option.
Which of the following statement is True about the composition of the deformation results in this Response Spectrum analysis? Choose two options.
Based on the results from this Response Spectrum analysis, which direction deforms the most for this water tank structure? Choose the best option.
Insert a Total Deformation under Solution for the Response Spectrum analysis of water tank, what is the maximum value? Choose the option closest to your result. Choose the best option.
What is the default modes combination type in Ansys Response Spectrum analysis? Choose the best option.
For the 6th mode of the water tank structure, find the spectrum value from the acceleration input spectrum? Choose the option that is close to the obtained value.
What is the correct setup for Response Spectrum analysis in Ansys Workbench? Choose the best option.
Which of the following statement is True about the boundary condition in this Response Spectrum analysis of the water tank? Choose two correction options. Choose two options.
Which of the following statement is True about number of modes to extract in the modal analysis for this water tank Response Spectrum analysis? Choose the option that is close to your setup.
For this water tank response spectrum analysis, which modes are used in mode combination? Choose the best option.