Course Assessment - Single Point Response Spectrum Analysis
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
Identify the True statement with respect to the Response Spectrum Analysis.
CorrectIncorrect -
Question 2 of 10
2. Question
The abscissa of the response spectrum analysis has _____ values.
CorrectIncorrect -
Question 3 of 10
3. Question
Identify the False statement from the given options.
CorrectIncorrect -
Question 4 of 10
4. Question
In modal analysis, if the modes were evenly spaced with an approximate difference larger than 15%, which of the following mode combination methods will provide appropriate results?
CorrectIncorrect -
Question 5 of 10
5. Question
Which of the following mode combination methods is a default method in ANSYS?
CorrectIncorrect -
Question 6 of 10
6. Question
The coupling coefficient 'Epsilon' which accounts for modal correlations has its value ranging from _____ to _____ . Choose the option with the correct combination to fill the blanks.
CorrectIncorrect -
Question 7 of 10
7. Question
_____ Analysis is a pre-requisite of Response Spectrum analysis.
CorrectIncorrect -
Question 8 of 10
8. Question
An input spectrum can be classified into _____ region/regions based on frequencies.
CorrectIncorrect -
Question 9 of 10
9. Question
An In Phase response of the modes leads to _____ behavior.
CorrectIncorrect -
Question 10 of 10
10. Question
Lindley Yow method uses _____ values to calculate alpha.
CorrectIncorrect