Quiz — Lumerical FDTD — FDTD Algorithm
Quiz Summary
0 of 6 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 6 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 6
1. Question
What are some of the advantages of the FDTD method?
CorrectIncorrect -
Question 2 of 6
2. Question
The FDTD method should be used whenever you have a design with
CorrectIncorrect -
Question 3 of 6
3. Question
The finite-difference time-domain (FDTD) method is used to solve Maxwell's equations in the time domain. The equations are solved numerically on
CorrectIncorrect -
Question 4 of 6
4. Question
If we assume that the spatial grid size is uniform and that dx is the same as dy and dz, the simulation time increases like
CorrectIncorrect -
Question 5 of 6
5. Question
How many frequency points of data can be collected from a single simulation?
CorrectIncorrect -
Question 6 of 6
6. Question
Is it possible to get the CW, stead-state response of a system using a time-domain solver that excites the system with a short pulse?
CorrectIncorrect