Quiz — Lumerical INTERCONNECT — Creating Custom Models
Quiz Summary
0 of 16 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 16 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 16
1. Question
Which of the following INTERCONNECT elements are used to form the base of custom models?
(Select all that applies).
CorrectIncorrect -
Question 2 of 16
2. Question
Which of the following components can be modeled by an S-parameter element?
(Check all that applies)
CorrectIncorrect -
Question 3 of 16
3. Question
Which of the following S-parameter elements is suitable to model a modulator whose s-parameters are dependent on a modulating electrical signal?
CorrectIncorrect -
Question 4 of 16
4. Question
S-parameter data files can be automatically exported to be used in INTERCONNECT from an S-parameter sweep in FDTD.
CorrectIncorrect -
Question 5 of 16
5. Question
Which of the following are true about the Optical N port S-parameter element?
(Select all that applies)
CorrectIncorrect -
Question 6 of 16
6. Question
Below are some of the tasks in a typical workflow for creating a compound element. Match the tasks with appropriate steps.
Sort elements
- Step 2
- Step 3
- Step 1
-
Add ports
-
Connect relays
-
Create a compound element
CorrectIncorrect -
Question 7 of 16
7. Question
Which of the following is true?
CorrectIncorrect -
Question 8 of 16
8. Question
Which of the following steps can be used to parameterize a compound model?
(Select all that apply)
CorrectIncorrect -
Question 9 of 16
9. Question
Which of the following are true about Scripted elements?
(Select all that apply)
CorrectIncorrect -
Question 10 of 16
10. Question
How can you add a new scripted element to your circuit?
CorrectIncorrect -
Question 11 of 16
11. Question
Which of the following are true about the Scripted element?
(Select all that applies)
CorrectIncorrect -
Question 12 of 16
12. Question
Which of the following elements can be added without using the Element Library?
(Select all that apply)
CorrectIncorrect -
Question 13 of 16
13. Question
Which of the following are true about the differences/similarities between an Optical N Port S-Parameter element and a Scripted element?
(Select all that apply)
CorrectIncorrect -
Question 14 of 16
14. Question
Download the s_parameter_MMI.dat file. Open a new project in INTERCONNECT. Add an Optical N port S-parameter element and load the data from the s-parameter_MMI.dat file.
How many ports does the S-parameter element have?
CorrectIncorrect -
Question 15 of 16
15. Question
Add an ONA. Connect the output port of the ONA to port 1 of the S-parameter element and the input of the ONA to port 3 of the S-parameter element. Run a frequency domain simulation around a center frequency of 193 THz (set at the ONA). What is the absolute value squared of the transmission between port 1 to port 3 at 193 THz in TM mode? Give your answer with 3 decimal precision.
(For example, if the answer is 0.20375 then type 0.204)
CorrectIncorrect -
Question 16 of 16
16. Question
What is the gain between port 1 to port 3 at 193 THz in TM mode? Give your answer in units of dB with 1 decimal precision.
(For example, if the answer is -2.23 dB then type -2.2).
CorrectIncorrect