Please note that you only have 5 attempts to pass this Quiz.
0 of 14 Questions completed
Questions:
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 14 Questions answered correctly
Your time:
Time has elapsed
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
A boundary layer is a thin region close to a surface where…
The boundary layer thickness $\delta(x)$ is defined as the distance from the wall where the fluid velocity reaches what percentage of the freestream velocity?
A boundary layer will cease to exist when the flow…
The distance that streamlines outside of the boundary layer are effectively moved by the presence of the boundary layer is called…
In order to calculate the drag force on a plate, you need to know…
From scale considerations of the boundary layer, which of the following is true?
At the outer edge of the flat plate boundary layer…
At walls, the “No Slip” condition for viscous flows requires that…
Who was the first person to obtain a general analytical solution to the flat boundary layer equations?
The Blasius solution to the boundary layer equations transforms the original set of partial differential equations into
From the Blasius solution, we see that the boundary layer thickness varies as…
What is the significance in developing correlations for boundary layer quantities such as skin friction coefficient and drag?
The Faulkner-Skan equation generalizes of the laminar Blasius boundary layer solution for…
Using three-dimensional boundary layer equations, what significant flow feature can be captured than cannot be captured with the two-dimensional equations?