This lesson is the first part of the simulation procedure for electrothermal two-way coupling between Ansys Maxwell and Ansys Icepak.
This lesson shows how to enable and add a thermal modifier to Maxwell, which is necessary to enable two-way coupling between Maxwell, an electromagnetic-based solver, and Icepak, a fluids-based solver. Temperature-dependent properties in the Maxwell design must be enabled and defined for at least one component. Material resistivity and conductivity are functions of temperature, so a proper temperature coefficient must be used while assigning a thermal modifier.
This lesson guides you through a step-by-step procedure to prepare a Maxwell model for thermal simulation using Icepak by enabling temperature dependence and assigning thermal modifiers via the material properties.
To download Ansys Electronics Desktop Student version for free, click here