# Outline Workshops Using Ansys HFSS — Lesson 8

This lesson is just practice work for what you have learned in the previous lessons. It motivates you to apply the HFSS Getting Started concept to construct a 30-mm-long section of coax with a thick outer jacket and then set up and run the simulation.

This lesson consists of one workshop which covers the simulation aspects of the creation of a 30-mm- long coax section. The outline for this workshop is as follows:
open AEDT >> construct a geometry >> add excitations >> add solution setup and frequency sweep >> simulate it >> plot S parameter >> plot and animate field

var option_df_35918 = {"outline":[],"backgroundColor":"#898A8D","forceFit":"true","autoEnableOutline":"false","autoEnableThumbnail":"false","overwritePDFOutline":"false","direction":"1","pageMode":"1","source":"https:\/\/courses.ansys.com\/wp-content\/uploads\/2021\/07\/HFSS_GS_2020R2_EN_WS8.1_OutlineCoax30KQ-1.pdf","wpOptions":"true"}; if(window.DFLIP && DFLIP.parseBooks){DFLIP.parseBooks();}